Coal Dust Cleaner / Cement Dust / Mine Dust
For Radiators, Heat Exchangers and Cooling/heating Coils
REMARKABLE EFFECT ON
Radiators of Dozers
Radiators of Crain's
Radiators of Dumpers
Radiators of Railway-engines
Heat Exchangers of Lifts
AHU and A.C. Units (Internal and External) The Problem:
In thermal power plants, coal mines and every department of coal handling plant, coal durst is regularly flying during its handling. This coal dust sticks on the fins of radiators/heat-exchangers and then the efficiency of these radiators/heat-exchangers is reduced, which further leads to machine failures.
First Time in India.
- For this problem we recommend our product REDCO/GREYGO
- REDCO/GREYGO will loosen the coal dust deposits from the radiator/heat-exchanger coils and machine part and will clean the machine online without going for shutdown.
- You can clean your radiators externally even without dismantling them.
Advantages
- It saves time as you do not need to dismantle the radiator/heat-exchanger from machine for cleaning purpose. As Cleaning is done On-line.
- It saves money as it is cost effective when compared with the conventional procedure of removing radiator from machine and sending it for cleaning.
- It increases the life of radiator as no brush or any mechanical force is being applied for its cleaning.
- REDCO/GREYGO is very safe to use, it does not contains any acids and caustic material.
- No precaution is required to use REDCO/GREYGO as it is an organic and environmentally friendly product
- U can regularly clean your radiators online in the machine itself and can keep the efficacy of your machine
Intact
- First spray REDCO/GREYGO a 2 TO 10 Ltrs(depending on radiator size) on the fins of radiator one side which is exposed to atmosphere.
- Leave the REDCO/GREYGO to react with coal durst for 5 to 10 minutes
- Then apply water wash with good pressure, preferably by Hydrant
- You will find all of black water/cement dust and foam coming
- Continue to wash till foam stops coming
- Then apply REDCO2 1 to 5 Ltrs ( depending on radiator size) on the same side
- Leave for 5 to 10 minutes
- Then wash with pressure till foam and black water stops coming.
- Apply the same chemicals on second side if the radiator is dismantle
Packing
REDCO/GREYGO is available in our two standard packing of 50/35 ltrs
Recommendations
Periodic cleaning (Monthly/Bi-Monthly) of radiators/heat-exchangers is recommended to maintain its